BESAPLAST DAT 230
Centrally positioned waterstop of the DAT series, offering direct sealing against pressurised water. Compared with conventional internal waterstops, reinforcement routing is considerably simplified and more economical.

13 products
Centrally positioned waterstop of the DAT series, offering direct sealing against pressurised water. Compared with conventional internal waterstops, reinforcement routing is considerably simplified and more economical.
Eccentric version of the DAT series with an additional compression chamber, which also secures the required edge distance. Optionally combined with connection waterstops for polymer sealing sheets.
Alternative version of the DAT 290 with integrated welding flanges for connection to polymer sealing sheets.
Internal waterstops for construction joints in concrete structures, available with steel plates where required. Supplied in Nitriflex to DIN 18541 and Elastoflex to DIN 7865, as well as TPE, PE and PVC-P.
Internal waterstops for expansion joints in concrete structures, listed in the BESAPLAST waterstop programme with and without steel plates.
External waterstops for construction and expansion joints, including versions with lateral steel plates, from the BESAPLAST waterstop programme.
Joint sheets (Stegbahnen), factory-made moulded parts (Formteile) forming complete waterstop systems, and formwork accessories, as listed in the BESAPLAST catalogue.
Three-layer composite polymer membrane with a robust polymer layer laminated on one side with a polyester fleece, forming a permanent bond with concrete cast against it. Applied horizontally and vertically, including onto existing walls.
Double-sided adhesive tape used to join Besamembran strips lengthwise, as shown in detail P-02. Tight overlap made with 4 cm wide double-sided butyl tape.
APP150 tape used for cross-connections of membrane strips and for interior and exterior corner execution, as shown in details P-01, P-01A, P-04 and P-05.
Sealing cord listed in the Besamembran product data sheet as part of the ancillary material range for the membrane system.
EPDM flange for sealing pipes, tubes and round penetrations through the Besamembran waterproofing membrane.
Liquid sealant based on a bitumen-rubber or butyl compound, listed in the Besamembran product data sheet under materials.
Looking for installation drawings? Open the detail library.