13 products
Illustrative imageInternal waterstops for construction joints in concrete structures, available with steel plates where required. Supplied in Nitriflex to DIN 18541 and Elastoflex to DIN 7865, as well as TPE, PE and PVC-P.
Illustrative imageInternal waterstops for expansion joints in concrete structures, listed in the BESAPLAST waterstop programme with and without steel plates.
Illustrative imageExternal waterstops for construction and expansion joints, including versions with lateral steel plates, from the BESAPLAST waterstop programme.
Illustrative imageCapping joint tapes (Fugenabschlussbänder) from the BESAPLAST programme, used to close and seal joints at the surface.
Illustrative imageJoint sheets (Stegbahnen), factory-made moulded parts (Formteile) forming complete waterstop systems, and formwork accessories, as listed in the BESAPLAST catalogue.
Illustrative imageWall and ceiling joint profiles for movement joints, part of the DEFLEX programme covering joint, wall, floor, ceiling and roof profiles.
Illustrative imageSpecial-purpose profiles (Sonderprofile) produced by DEFLEX for joint situations outside the standard programme.
Illustrative imageThree-layer composite polymer membrane with a robust polymer layer laminated on one side with a polyester fleece, forming a permanent bond with concrete cast against it. Applied horizontally and vertically, including onto existing walls.
Illustrative imageDouble-sided adhesive tape used to join Besamembran strips lengthwise, as shown in detail P-02. Tight overlap made with 4 cm wide double-sided butyl tape.
Illustrative imageAPP150 tape used for cross-connections of membrane strips and for interior and exterior corner execution, as shown in details P-01, P-01A, P-04 and P-05.
Illustrative imageSealing cord listed in the Besamembran product data sheet as part of the ancillary material range for the membrane system.
Illustrative imageEPDM flange for sealing pipes, tubes and round penetrations through the Besamembran waterproofing membrane.
Illustrative imageLiquid sealant based on a bitumen-rubber or butyl compound, listed in the Besamembran product data sheet under materials.
Looking for installation drawings? Open the detail library.
